Unless all you do is ride out and back, it’s hard to avoid the bends. Cornering at speed is a crucial skill, whether it’s in a race a group ride, or on your own.
There’s a two aspects to focus on when you’re cornering. First, there’s the set-up as you approach, and then the actual execution as you enter the corner.
Set-up
When you’re getting ready to go through a corner, you’ll want to consider a few things. Irrespective of the sharpness of the corner, you still want to make the turn as straight as you can and keep as much speed as you can.
That means when you are about to enter the corner, you should stay as wide as you can. By starting the corner on the outside, you can dart right through the apex.
Stay loose
It’s key to stay relaxed. If you’re tense or stressed, you may find yourself overturning and unable to correct if you’ve taken the wrong line. Take a deep breath and stay loose. If you’re clutching the bars as if you’re going to fall off a cliff, you’re not going to flow through the corner well.
Look ahead
In a race, you want to look ahead of you. Don’t stare at the wheel you’re following. Focus on where you want to go. By looking through the corner, you’ll be able to follow the optimal line.
Speed
If it’s the first time you’re going through this corner, you’ll have to guess what speed is the best. That means feathering the brakes before the corner, never during. Slamming your brakes on in the corner of an apex will result in either a botched corner, or worse, a crash.
Outside pedal down, inside pedal up
Although you may be able to pedal through the corner, it’s often safest to presume you can’t. Put your weight on your outside pedal, and lift your inside pedal up. If you have your inside pedal down, you may clip your pedal on the road.
Keep the speed going
As you exit the corner, head to the outside of the road so you don’t slow down. Once you’re clear, you can stand up and step on the pedals if you’ve lost any speed.
Watch: Mathieu van der Poel puts cyclocross skills to use cutting corner in road race
Click Here to Read the Full Original Article at Canadian Cycling Magazine…